螺旋管聚能药包根底光面爆破机理研究及应用

针对现阶段光面爆破存在的根底不平整问题以及炸药能量利用率低的问题，提出了一种螺旋管聚能药包。为探究药包的破岩机理，采用LS-DYNA数值模拟和钻孔爆破试验相结合的方法研究了此药包的破岩机理。数值模拟结果表明，螺旋管聚能药包能形成连续金属射流侵彻炮孔孔壁，孔壁被侵彻出垂直炮孔方向的裂缝。用普通柱状药包和此药包进行钻孔爆破对比试验，结果表明，螺旋管药包试样的残留炮孔孔壁有螺旋形侵彻缝，印证了数值模拟的侵彻结果。并且相比于普通柱状药包，其炮孔利用率提高7.2%、扩孔率提高8.4%。将此药包应用于舟山绿色石化基地围垦区，结果表明，螺旋管药包爆破区域根底高度平均比普通装药低14 cm，根底高度标准差比普通装药小12 cm。研究成果在爆破工程应用中有很大价值，可以降低施工成本、加快施工进度、提高爆破效果，适合在矿山开采、井巷掘进等工程中使用。     

PVDF应力测量技术及在混凝土冲击实验中的应用

介绍了使用PVDF(polyvinylidene fluoride,聚偏二氟乙烯)应力计的应力直接测量技术。在SHPB装置上进行自制PVDF应力计动态压电系数的标定实验,分析了应力集中、横向泊松效应、摩擦效应对PVDF应力计信号及动态压电系数的影响。用PVDF应力计进行了混凝土的冲击压缩实验。利用混凝土前后端面PVDF应力计信号分析了实验过程中混凝土试样的应力均匀性。与应变计直测应变技术相结合得到了混凝土的动态应力-应变关系。     

具有恒定冲击载荷的梯度泡沫金属材料设计

多胞材料可通过大变形大量地吸收冲击能量，引入密度梯度可进一步提高其耐撞性。梯度多胞材料的宏观力学响应对材料密度分布极为敏感，不同类型的细观构型的影响也极为不同。已有的研究工作主要局限在对给定的密度梯度分析其动态响应，较少对耐撞性设计方法进行研究。本文针对梯度闭孔泡沫金属材料，基于非线性塑性冲击波模型发展了耐撞性反向设计方法，以维持冲击物受载恒定为目标，运用级数法获得了简化模型和渐近解。利用变胞元尺寸法构建了连续梯度变化的三维Voronoi细观有限元模型，并利用ABAQUS/Explicit有限元软件对理论设计进行数值验证。结果表明，反向设计理论简化模型的渐近解对于梯度闭孔泡沫金属材料的耐撞性设计是有效的，所提出的耐撞性设计方法在控制冲击吸能过程和冲击物受载方面具有指导意义。     

Modeling photo-induced deformation of glassy splay-bend and twist nematic sheets

Azobenzene-containing glassy nematic sheets deform in response to light in a complicated way depending on director distribution. To quantify the large-deflected deformation, a theoretical model is developed for the sheets with typical splay-bend and twist director distributions. A third-order in-plane displacement assumption is adopted to characterize the effect of transverse shear deformation, and the necessity is discussed through two examples for which analytical solutions are obtainable. Though this work is an extension of the third-order shear deformable theory for anisotropic laminates, it involves some new ingredients such as varying spontaneous strains and special material symmetries. The results are expected useful for analysis and design of the glassy nematic sheets in actuation applications.     

泡沫铝夹芯双圆管结构的准静态轴向压缩性能研究

对泡沫铝夹芯双圆管结构的准静态轴压性能进行了实验研究,发现该新型结构的比质量吸能效率远远高于传统的泡沫铝夹芯单管,并接近甚至超过相应的空管结构;其内外管变形模式均与空管不同且受内外管组合的影响.本文讨论了它的变形机理,分析了外管壁厚对其压缩行为的影响,发现增大外管壁厚有利于增大结构的行程利用率,提高结构的比质量能量吸收...     

Adsorption of organic anions from aqueous solutions by layered silicates modified with cationic surfactant

The interaction of anionic organic dyes with layered silicates (kaolinite and hydromica) both natural and modified with a cationic surfactant (cetylpyridinium bromide) is studied by adsorption and spectral methods. The adsorption of organic anions by modified silicates is proved to proceed via the formation of ionic associates of these adsorbates with the modifier. It is found that the interaction of large organic anions with the modifier results in the desorption of the latter, followed by its secondary adsorption in the form of ionic associates with the adsorbates. The selectivity of layered silicates modified with the cationic surfactant to organic anionic dyes is determined by the stability of the formed dye/modifier ionic associates and their affinity to the surface. These factors depend on the sizes of the hydrocarbon moieties of both components of the associates. Therefore, the selection of a suitable modifier allows one to control the selectivity of modified minerals to different organic anions. Using long-chain organic cations as modifiers, organic anions of any sizes can be extracted from aqueous solutions.     

SHPB数据处理中的二波法与三波法

分析了传统的分离式霍普金森压杆测试数据处理方法(二波法)及其他被提出的改进方法的误差及优缺点,给出了传统二波处理方法在不同被测材料情况下所带来的误差。分析结果表明,基于绝对时间下的试件应力及应变计算的三波处理法具有最好的可信度且能最大程度地避免数据处理过程中的人为因素。传统二波法在不同测试情况下均不是优选的方法。对于三波测试无法进行的情况,也提出了一种简化三波处理方法。     

Effect of Cyclic Deformation on Magnetorheological Elastomers

Fatigue properties of magnetorheological elastomer (MRE) samples were investigated based on cis-polybutadiene rubber by using a fatigue test machine. Three MRE samples with iron particles mass fraction of 60%, 70%, and 80% were fabricated, and their properties dependence of three strain amplitudes (50%, 75%, and 100%) were measured. The absolute magnetorheological (MR) effect, storage modulus, and loss modulus of MRE samples after fatigue were evaluated by a modified dynamic mechanical analyzer. The results revealed that MR effect, storage modulus, and loss modulus of MREs containing 80% iron particles depended strongly on the strain amplitudes and the number of cycles, while storage mod-ulus and loss modulus of MREs containing 70% iron particles also depended on the strain amplitudes and the number of cycles but not as strongly as sample which contains 80% iron particles, but the properties of MREs containing 60% iron particles after cyclic deforma-tion were almost independent of the fatigued conditions. In order to investigate the fatigue mechanism of MREs, the sample was carried out with a quasi-static tensile testing and its surface morphology during testing was observed in situ by scanning electron microscopy.     

Shear-thickening behavior of polymethylmethacrylate particles suspensions in glycerine–water mixtures

The rheological behavior of polymethylmethacrylate (PMMA) particles suspensions in glycerine–water mixtures has been investigated by means of steady and dynamic rheometry in this work. The shear rheology of these suspensions demonstrates a strong shear thickening behavior. The variations of shear viscosity with the volume fraction and ratios of glycerine to water are discussed. The effect of volume fraction can be qualitatively explained using a clustering mechanism, which attributes the phenomena to the formation of temporary, hydrodynamic clusters. The influence of interactions between glycerine–water mixtures and PMMA particles on shear thickening is investigated by varying the ratio of glycerine to water. In addition, the reversible and thixotropic properties of suspensions of PMMA dispersed in glycerine–water (3:1) mixtures are also investigated, and the results demonstrate the excellent reversible and thixotropic properties of PMMA particle suspensions.     

钛基纤维炸药水下爆炸性能的初步分析

通过爆炸压力时程曲线分析含钛纤维炸药的压力峰值、水下比冲击波能、比气泡能、质量能量及能量密度变化趋势,通过对所得能量结果分析钛纤维炸药的化学反应过程。结果表明:含钛纤维炸药的压力峰值、比冲击波能随钛纤维含量的提高而降低,比气泡能随钛纤维含量的提高而增大,质量能量及能量密度都随钛纤维含量的提高而增大。随距离的增大,钛纤维炸药压力峰值衰减比RDX的慢,而不同钛纤维含量的钛纤维炸药的比冲击波能、比气泡能在不同距离处随钛纤维含量变化趋势基本一致。根据炸药反应释放的总比能量进行理论分析,得出钛纤维炸药爆炸反应方程式。